/// 500 SERIES CHANNEL AMPLIFIER
The More ‘N Less is a 500 series Channel Amplifier with both mic and line inputs. No switching is required be- tween these two inputs. It has an output level control, a single knob compression and simultaneous make-up gain function “Comp”, a static boost equalizer “More”, and a dynamic loss equalizer “Less”.
The More ‘N Less is aimed at the front of the recording chain where broad strokes of sound adjustment need to be made quickly without futz.
Features
- 500 series compatible (15 pin .156” edge type) so you get more functionality ‘n less space
- Mic input (configurable front only OR front and rear)
- Concurrent line input (rear input only) – no switching required
- Line level +4 dBu analog input (Max +21dBu or +27dBu optional)
- Cinemag steel 1:2 output transformer for floating out- put, isolation, and drive
- “Comp” compression control for flat squeeze of pro- gram with simultaneous makeup and increasing ratio
- “More” static add only equalizer (“Top” – high fre- quency OR “Bottom” – low frequency)
- Separate “Less” frequency sensitive gain reduction (“Top” – high frequency OR “Bottom” – low frequency)
- Separate gain reduction metering for “Comp” and “Less” functions
- Output polarity control
- Four position pad to optimize drive of superb Cinemag mic input transformer
- Self contained remote fader operation (no external power required)
- 2 expansion headers for remote AC level control and/or JCF SSDA option
Specifications
Power Consumption | |
+16v | 140 ma. max |
-16v | 140 ma. max |
+48v | 13 ma. max with Mic short | Microphone Preamp |
EIN | -100dBu (with 150 ohm source @ 71 db of gain) |
Max Gain | 71 dB unloaded output |
Min Gain | 24 dB unloaded output |
Input Z | 1k ohms | Frequency Response |
Line | +/-1dB 6 Hz – 140 kHz (.775 VRMS out) |
Mic | +/-1dB 6 Hz – 90 kHz (.775 VRMS out) | Noise |
Line Input Z | 22k ohms |
Line: 150R Source | -62dBu to -45dBu (depending heavily on “Lev” position and pad actuation) |
Min Gain | -5 dB |
Max Gain | +13dB | MOBC |
Unloaded | +28dBu |
600R Load | +27dBu | THD Line (Unity, unloaded output) |
Line: 0.1% | 0dBu out |
Line: 0.07% | +10dBu out |
Line: 0.12% | +20dBu out | THD Mic (42dB gain, unloaded output) |
Mic: 0.06% | 0dBu out |
Mic: 0.05% | +10dBu out |
Mic: 0.1% | +20dBu out |